Hey everyone! I’ve been diving deep into the world of eco-friendly paints for my latest home renovation project, and I’ve hit a bit of a snag. I’m using Earthborn Claypaint for the walls, which I absolutely adore for its natural ingredients and minimal environmental impact. However, I’ve noticed some lapping marks appearing as I work, which is a bit frustrating. I’ve tried a few techniques to fix them without having to strip the walls and start over, but I’m curious to hear what’s worked for you all.
Previously, I’ve used Auro Natural Paints with great success, especially on wood surfaces, but this is my first time tackling larger wall areas with a clay-based paint. I’ve found that adjusting the thickness of the paint and ensuring even application helps, but I’m still perfecting my technique. Also, I’m mindful of the environmental considerations, so I’m trying to avoid any solutions that involve harsh chemicals or excessive waste.
So, here’s my main question: What are your go-to techniques for fixing lapping marks in eco-friendly paints? Have you found certain brands or types of natural paints more forgiving in this regard? Any tips on application tools or methods that help prevent these marks in the first place? Looking forward to hearing your experiences and advice!
Hey @GreenThumbPainter, I’ve had a similar issue with Earthborn Claypaint in the past. What worked for me was using a high-quality, natural bristle brush and applying the paint in a ‘W’ pattern, then filling it in without lifting the brush. This technique helped me avoid lapping marks by ensuring a more even application. Also, keeping the room at a consistent temperature helped the paint dry more uniformly.
3 Likes
I’m a big fan of Auro Natural Paints too, but when it comes to walls, I’ve switched to Biofa Eco-Paint. It’s a bit more forgiving with application errors. For fixing lapping marks, I lightly sand the area with fine-grit sandpaper and then apply a thin coat over it. It blends surprisingly well!
2 Likes
@EcoWarrior123 Thanks for the tip! I’ll definitely try the ‘W’ pattern technique. Do you think the type of roller cover makes a difference as well? I’ve been using a synthetic one, but I’m wondering if a natural fiber roller would be better.
1 Like
I’ve found that maintaining a wet edge is crucial when working with eco-friendly paints. This means working in smaller sections and making sure to blend each new stroke into the previous one before it dries. It’s a bit more time-consuming, but it really helps in avoiding those pesky lapping marks.
4 Likes
@GreenThumbPainter Absolutely, the roller cover can make a big difference. I prefer using a natural fiber roller for Earthborn Claypaint as it holds the paint better and provides a smoother finish. Just make sure to keep it evenly loaded with paint to avoid streaks.
2 Likes
Has anyone tried using a paint conditioner with their eco-friendly paints? I’ve heard it can help with application and reduce the chances of lapping marks, but I’m not sure if it’s compatible with all natural paint brands.
1 Like
@SandyShorelines I’ve used a natural paint conditioner with Biofa Eco-Paint, and it worked wonders. It made the paint flow better and helped eliminate brush marks. However, I’d recommend checking with the manufacturer of your specific paint brand to ensure compatibility.
3 Likes
I’ve been using Earthborn Claypaint for a while now, and I totally get where you’re coming from with the lapping marks. One thing that’s worked for me is to slightly dampen the wall before applying the paint. It seems to help the paint glide on more smoothly and reduces the chances of those pesky marks. Also, I’ve found that working in smaller sections and keeping a wet edge really helps maintain consistency.
2 Likes
Interesting tip about dampening the wall! I haven’t tried that yet. I usually go for a roller with a thicker nap when I’m dealing with clay paints. It seems to hold more paint and distribute it more evenly, which cuts down on lapping marks. Plus, it’s a bit faster than using a brush, especially on larger walls.
Rollers can be a game-changer, but I’ve noticed that the type of roller cover makes a big difference too. I prefer using a microfiber roller cover with Earthborn Claypaint. It gives a really nice finish and seems to minimize texture differences that can lead to lapping marks. Just make sure to keep the roller evenly loaded with paint to avoid streaks.
2 Likes
I’m all about the tools too! But have you guys considered the angle at which you’re applying the paint? I’ve found that holding the brush or roller at a slight angle, rather than straight on, helps spread the paint more thinly and evenly. It’s a small adjustment, but it’s made a noticeable difference in avoiding lapping marks for me.
4 Likes
Angle and tools are key, but let’s not forget about the paint consistency itself. Sometimes, I’ll add a tiny bit of water to the Earthborn Claypaint to thin it out just slightly. It makes the paint easier to work with and helps prevent those lapping marks. Just be careful not to overdo it, or you might affect the paint’s coverage and durability.
I’ve been using Earthborn Claypaint for a while now, and I’ve found that keeping a wet edge is crucial to avoid lapping marks. I usually work in small sections and make sure to blend the edges before the paint starts to dry. Also, using a high-quality roller can make a big difference in achieving an even coat.
2 Likes
Interesting to hear about Biofa Eco-Paint. I’ve been sticking with Earthborn because of its texture, but I might give Biofa a try for my next project. For lapping marks, I’ve had success with a damp sponge to gently blend the edges. It’s a bit of a hassle, but it works without needing to sand.
3 Likes
I’ve tried both Auro and Earthborn, and while I love the finish of Earthborn, I agree that Auro is more forgiving. For lapping marks, I’ve found that adding a bit of water to the paint can help it level out better. Just a small amount, though, to keep the integrity of the paint.
4 Likes
I’m all about minimizing waste, so when I get lapping marks, I try to fix them without adding more paint. I use a technique called ‘feathering’ where I lightly brush over the marks with a dry brush to blend them into the surrounding area. It takes a bit of practice, but it’s effective.
5 Likes
I’ve been experimenting with different application tools and found that a foam roller gives me the smoothest finish with Earthborn Claypaint. It seems to reduce the chances of lapping marks significantly. Also, working in natural light helps me spot and fix any issues before the paint dries.
2 Likes
Has anyone tried using a paint conditioner with eco-friendly paints? I’ve heard it can help with application and reduce issues like lapping marks. I’m curious if it affects the paint’s eco-credentials, though. Might be worth looking into for those tricky spots.
4 Likes
I’ve actually tried using a paint conditioner with my eco-friendly paints, and it made a noticeable difference. It helped the paint flow better and reduced those pesky lapping marks. Just make sure to check if the conditioner is compatible with your specific brand of paint. I used it with a different brand than Earthborn, but it’s worth a shot.
5 Likes